Polyester Anti-Static Spunlace Stiff Filter Material Coated

• Certification: RoHS, ISO9001
• Feature: Corrosion-Resistant, Heat-Resistant
• Standard: Standard
• Material: Fabric
• Width: 1m/1.2m/1.5m
• Roll Length: 300m-500m
• Model NO.: SN-FHAD01
• Transport Package: Woven Bag
• Specification: 1m*300m
• Trademark: sano
• Origin: Huzhou
• HS Code: 56031410
• Production Capacity: 100000

Product Description

company introduction

 Huzhou sennuo fluorine material technology co., LTD. Is a company specializing in the production of bulk ptfe microporous membrane and the related composite products of high-tech enterprises, the company is located in northern zhejiang province, east of Shanghai Hangzhou in the south, the west according to  the taihu lake in the north, and wuxi Suzhou on the other side of the lake, lake is the only ring taihu area because of the name of the city, the transportation is convenient.




 The ePTFE air dust removal composite material uses needling, spunlaced felt and woven fabric produced by well-known brands at home and abroad as the carrier. And the use of the world's leading composite technology: high temperature thermal bonding, low temperature thermal bonding, glue spraying and other ways to make the film and the substrate together perfectly, concentrated advantages for precision filtration of dust. This material has the characteristics of waterproof and breathable, low resistance and high efficiency, easy to clear ash, energy saving and emission reduction, long service life, low operating cost and so on; And widely used in iron and steel, cement, chemical, power plants, waste incineration and other high pollution gas ultra-low emissions and other related industries.

Therefore, the filtration method is a surface filtration method, the dust will concentrate on the surface of the membrane, so as long as the vibration body, the dust on the surface will easily fall down, and then rinse with clean water.




Product Parameters

Type		ePTFE air dust-removing composite material
Name		Polyester needle felt coating	Polyester stripe anti-static needle felt coating	Polyester mesh anti-static needle felt coating	Polyester mixed conductive needle felt coating	Acrylic needle felt coating	PPS needle felt coating
Product Number		SN/PE/PE-506	SN/PE/PE-5041	SN/PE-506	SN/PE-506	SN/DT-506	SN/PPS-501
gram weight(g)		500	500	500	500	500	500
Thickness (um)		2.2	1.8	1.8	1.8	2.2	1.7
Air Permeability   (L/m².S@125pa)		25-40	25-40	25-40	25-40	25-40	25-40
Resistance (Pa)		200-250	200-250	200-250	200-250	200-250	200-250
Filtration efficiency(%)		98	98	98	98	99	99
component	ground  cloth	Polyester filament	Polyester filament+ Conductive yarn	Polyester filament+ Conductive yarn	Polyester filament	Acrylic	PPS
	Surface layer	Polyester fiber	Polyester fiber	Polyester fiber	Polyester fiber/ Conductive fiber	Acrylic fiber	PPS fiber
Breaking strength (N/20cm)	MD	≥1100	≥1100	≥1100	≥1100	≥850	≥900
	CD	≥1500	≥1500	≥1500	≥1500	≥850	≥1200
elongation at break(%)	MD	≤30	≤30	≤30	≤30	≤25	≤25
	CD	≤50	≤50	≤50	≤50	≤45	≤45
Operating temperature (ºC)	Long-term use temperature	130	130	130	130	125	160
	Instantaneous use temperature	150	150	150	150	140	190
Heat shrinkage rate 150ºC×30min(%)	MD	≤1	≤1	≤1	≤1	≤1	≤1
	CD	≤1	≤1	≤1	≤1	≤1	≤1
Post processing		Heat setting,Singing,Glazing ,PTFE laminating	Heat setting,Singing,Glazing ,PTFE laminating	Heat setting,Singing,Glazing ,PTFE laminating	Heat setting,Singing,Glazing ,PTFE laminating	Heat setting,Singing,Glazing ,PTFE laminating	Heat setting,Singing,Glazing ,PTFE laminating

 

Type		ePTFE air dust-removing composite material
Name		Aramid needle felt coating	Flumesi needle felt coating	729/922 Woven fabric	Fiberglass cloth coated filter	PTFE Filter coating
Product Number		SN/AT-501	SN/P84+GE/GE-858	SN/729JZB-316	SN/BXB-775	SN/PTFE-750
gram weight(g)		500	850	315	775	700
Thickness (um)		2.3	2.2-2.8	0.6	0.8 ±0.1	1.0 ±0.2
Air Permeability   (L/m².S@125pa)		25-40	25-40	25-40	20-30	25-40
Resistance (Pa)		200-250	200-250	200-250	200-250	200-250
Filtration efficiency(%)		99	98	97	99	99
component	ground  cloth	Aramid	glass fiber	Polyester woven fabric	glass fiber	PTFE woven fabric
	Surface layer	Aramid fiber	P84 fiber/glass fiber	Polyester fiber	glass fiber	PTFE fiber
Breaking strength (N/20cm)	MD	≥800	≥1800	3100	≥220	>700
	CD	≥1200	≥1800	2100	≥204	>500
elongation at break(%)	MD	≤25	≤10	188.8	≤48	≤20
	CD	≤45	≤10	22%	≤40	≤20
Operating temperature (ºC)	Long-term use temperature	204	260	130	260	250
	Instantaneous use temperature	240	300	150	280	265
Heat shrinkage rate 150ºC×30min(%)	MD	≤1	≤0.5	≤1	≤1	≤2
	CD	≤1	≤0.5	≤1	≤1	≤2
Post processing		Heat setting,Singing,Glazing ,PTFE laminating	Heat setting,PTFE impregnated or PTFE coated

Test standards:
* Air permeability (ASTM D737 test differential pressure: 125PA)
* Resistance (EN1822-3:1998) Test conditions: air flow 32L/Min filtered wind speed 5.33cm/s)
* Efficiency (GB19083 EN134) test particle size (DOP): 0.1-0.3um









Our advantages










Q & A

1: Delivery Time
   -Sample Order: 7-15days after receipt of the full payment.
   -Stock Order: 7-15days after receipt of the full payment
   -OEM Order: 15-300days after receipt of the deposit.

2 .Payment
T/T, Western Union, LC

3. Transportation
Transported by DHL, UPS, EMS, Fedex,Air freight. sea freight.